Fleximake logo
Fleximake water bladders · NZ

Fresh, Grey & Black Water Bladders

Flexible water storage for 4x4 touring, camper trailers, caravans and RV conversions. Standard sizes ready to ship, or a bladder made to fit the exact space in your build.

Made in Australia by Fleximake · supplied and supported in NZ by TowPro Group
Fleximake water bladder fitted in a 4WD rear footwell
AS/NZS 4020Drinking water bladders
Made to fitCustom shapes and fittings
Baffles availableLess slosh on the road
NZ supportQuoted and backed by TowPro
Three kinds of water

Fresh, grey and black

Every build needs somewhere to keep clean water, and somewhere to hold the water you've used. Fleximake makes bladders for all three.

Fresh water

Drinking water bladders in potable PVC or extra heavy-duty TPU, made to the AS/NZS 4020 standard for materials in contact with drinking water.

Grey water

Holding bladders for sink and shower water, so you can empty it at a dump point instead of onto the ground. Collapsible when empty.

Black water

Custom-built holding bladders for toilet waste in campers and conversions, made from suitable materials with fittings to match your system.

Custom builds

Made to your measurements

Measure the space

Send us the dimensions and photos of the cavity, under-floor void or drawer gap.

Choose the details

Fresh, grey or black water, PVC or TPU, fitting sizes and positions, and baffles if you want them.

Made in Australia

Fleximake builds the bladder at its factory in Victoria.

Fit and fill

Delivered to you anywhere in New Zealand, ready to plumb in.

Backed here in New Zealand

Supplied and supported by TowPro

TowPro Group is the New Zealand distributor for Fleximake. We're a family-run business in the Waikato with a coachbuilding and trailer background, so we know what it takes to fit water into a build.

Custom quotes

Send us the space, the fittings you want and what it's storing, and we'll quote it. Request a quote →

Delivered across NZ

We handle supply from Fleximake in Australia through to delivery anywhere in New Zealand.

Talk to us

Camper builders, RV dealers and DIY builds welcome. +64 27 786 9776 · info@towprogroup.co.nz

Common questions

Good to know

Is the drinking water safe?

Yes. Fleximake drinking water bladders are made from potable PVC or TPU to the AS/NZS 4020 standard. Give a new bladder a rinse before the first fill.

Can you make a black water bladder?

Yes. Black water bladders are custom-made to suit your camper or conversion, with fittings matched to your toilet and dump system. Get in touch with your measurements and we'll quote it.

Do I need baffles?

Baffles are worth adding to larger bladders that will be part-full while you drive. They reduce slosh, which helps handling and takes stress off the seams and fittings.

Hanging bladders: what holds the weight?

Hanging bladders must sit on a solid floor. The hanging points keep them in position; they aren't designed to carry the full weight of the water.

Will it fit my vehicle or build?

Every bladder has listed dimensions. Measure your space and allow for the bladder rounding out as it fills. If you're unsure, send us measurements and photos.